488 miles away
Overview
Spec Sheet
Shipping/Freight

2014 Komatsu PC138US LC-10 Earth Moving and Construction

$74,800 USD
Contact Information
4M Iron
344 Winningham Road,
St. George, South Carolina 29477
CONTACT :
Mike Finley
PHONE :
Stock #:
17846
YEAR:
2014
Manufacturer:
MODEL #:
CONDITION:
Used
HOUR METER:
5075
Equipment Description:
CAB WITH AC, BLADE, HYDRAULIC THUMB WITH BUCKET, UNDERCARRRIAGE AT 60% WITH STREET PADS, VERY CLEAN, RUNS GOOD
  • Engine
    • Make: Komatsu
    • Model: SAA4D95LE-6
    • Type: 4-cylinder, Turbocharged, Water-cooled Diesel Engine
    • Displacement: 3.26 liters (199 cu in)
    • Gross Power: 97.2 hp (72.5 kW) @ 2,050 rpm
    • Net Power: 93.5 hp (69.7 kW) @ 2,050 rpm
  • Dimensions
    • Maximum Length (Transport): 7,490 mm (24'7")
    • Ground Clearance: 390 mm (1'4")
    • Width: 2,490 mm (8'2")
    • Track Gauge: 1,980 mm (6'6")
    • Swing Radius: 1,490 mm (4'11")
  • Performance
    • Maximum Digging Depth: 5,890 mm (19'4")
    • Maximum Reach at Ground Level: 8,540 mm (28'0")
    • Bucket Digging Force: 89.5 kN (9,125 kgf)
    • Arm Digging Force: 63.9 kN (6,510 kgf)
    • Maximum Travel Speed: 5.1 km/h (3.2 mph)
  • Operating Weight
    • Operating Weight: 13,600 kg (29,980 lbs)
  • Hydraulic System
    • Pump Type: Variable Displacement Axial Piston Pump
    • Main Relief Pressure: 29,400 kPa (4,260 psi)
    • Pump Flow Capacity: 289 liters/min (76.3 gal/min)
  • Undercarriage
    • Track Shoe Width: 500 mm (20")
    • Number of Track Rollers (each side): 7
  • Fuel Capacity
    • Fuel Tank Capacity: 260 liters (68.7 gal)
  • Cooling System
    • Coolant Capacity: 20 liters (5.3 gal)
  • Other Features
    • Reduced tail swing design for maneuverability in tight spaces
    • Komatsu’s Hydraumind hydraulic system for better control and performance
    • Operator-friendly cab with climate control
    • Fuel consumption reduction features
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following