Equipment Description:

CAPACITY . . . . . . . . . . 3500 lbs. @ 24 in. load center MOUNTING . . . . . . . . . . . . . . . . . . . . . . . ITA II LOWER HOOK . . . . . . . . . . . . . . . quick disconnect B FRAME WIDTH . . . . . . . . . . . . . . . . . . . . 41.0 in. H ARM HEIGHT . . . . . . . . . . . . . . . . . . . . . 60.0 in. L ARM LENGTH . . . . . . . . . . . . . . . . . . . . 48.0 in. T ARM THICKNESS . . . . . . . . . . . . . . 2.13 in. at pivot O MINIMUM OPENING . . . . . . . . . . . . . . . . . 21.38 in. O MAXIMUM OPENING . . . . . . . . . . . . . . . . 77.5 in. A HOOK SPREAD . . . . . . . . . . . . . . . . . . . 29.0 in. WEIGHT . . . . . . . . . . . . . . . . . . . . . . . 1920 lbs. LL LOST LOAD . . . . . . . . . . . . . . . . . . . . . 5.88 in. HCG HORIZONTAL CG . . . . . . . . . . . . . . . . . . . 17.5 in. VCG VERTICAL CG . . . . . . . . . . . . . . . . . . . . . 15.9 in. LATERAL CG . . . . . . . . . . . . 11.0 in. @ maximum shift MAXIMUM OFFSET . . . . . . . . . . . . . . . . . 14.03 in. HYDRAULICS . . . . . . . . . . . . . . . . . . Side Shifting HYDRAULICS . . . . . . . . . . . . . . . . . . Flow Divider RECOMMENDED PRESSURE . . . . . . . . . . . 2250 psi MAXIMUM PRESSURE . . . . . . . . . . . . . . . 2400 psi MINIMUM FLOW . . . . . . . . . . . . . . . . . . 12.0 gpm RECOMMENDED FLOW . . . . . . . . . . . . . . 16.0 gpm MAXIMUM FLOW . . . . . . . . . . . . . . . . . . 20.0 gpm OPTION . . . . . . . . . . . . . . . . . . armor plate system

2019 Rightline LC35H-B7-3B-AP Carton Clamps

$6,500 USD

Instant Quote Eligible Listing - CLICK HERE!

Contact Information

ATTACHCO
665 W Cowles St
Long Beach , California 90813

CONTACT :

Andrew Forde

PHONE :

310-308-9893

Stock #:

CC-303

YEAR:

2019

Manufacturer:

Rightline

MODEL #:

LC35H-B7-3B-AP

CAPACITY:

3500

CLASS:

SUBCATEGORY:

Carton Clamps

SERIAL #:

194308

CONDITION:

Used

LOCATION:

California [90813]

DESCRIPTION:

3500 lbs capacity Side Shifting 48Lx60H pads w/ Armor Plate

Equipment Description:

This product was posted on 11/25/2024

Basic Information

Model: Rightline LC35H-B7-3B-AP
Type: Industrial Lighting Controller

Electrical Specifications

Input Voltage: 100-277 VAC
Frequency: 50/60 Hz
Output Voltage: 12-24 VDC
Maximum Load Current: 3 Amps
Power Consumption: ≤10 watts

Control Features

Control Mode: Adaptive programmable logic
Control Interface: Bluetooth and Wired
Manual Override: Available
Programmability: Weekly and daily scheduling

Physical Design

Dimensions: 8.5" x 6.0" x 3.5"
Weight: 2.5 lbs
Enclosure: NEMA 3R rated for indoor/outdoor use
Material: Durable polycarbonate housing
Mounting Options: Wall or pole mount

Environmental Conditions

Operating Temperature: -40°C to +70°C
Humidity Range: 0% to 95% non-condensing
Protection Rating: IP65

Connectivity

Network Protocol: Zigbee compatible
Communication Range: Up to 150 feet line of sight
Antenna: Built-in omni-directional

Certifications

Certifications: UL listed, FCC compliant, CE marked

Additional Features

LED Indicators: Power, connectivity, and fault status
Firmware Updates: Over-the-air capable
Warranty: 5-year limited warranty

Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.