Equipment Description:

Arm Height 48" Arm Length 48" Arm Thickness 3.625" Capacity 2000 lbs @ 24 inch Load Center Estimated Weight 1433 lbs Flow Divider Yes Frame Width 41" Horizontal Center of Gravity 14.3" Hook Spread 32.5" Lateral Center of Gravity 10.4" at maximum shift Lost Load 3.75" Lower Hook Bolt On Maximum Flow 20 gpm Maximum Pressure 2250 psi Minimum Flow 8 gpm Mounting Class Class II Opening Range 21.5" - 76.75" Recommended Flow 6 gpm Recommended Pressure 2000 psi Sideshift Yes Vertical Center of Gravity 12.7"

2012 Rightline LC20C-10-3A Carton Clamps

$5,500 USDFor Rent

$1 USD per day

$1 USD per week

$1 USD per month

Instant Quote Eligible Listing - CLICK HERE!

Contact Information

ATTACHCO
665 W Cowles St
Long Beach , California 90813

CONTACT :

Andrew Forde

PHONE :

310-308-9893

Stock #:

CC-182

YEAR:

2012

Manufacturer:

Rightline

MODEL #:

LC20C-10-3A

CAPACITY:

2000

CLASS:

SUBCATEGORY:

Carton Clamps

SERIAL #:

120845

CONDITION:

Rental

LOCATION:

California [90813]

DESCRIPTION:

2000lbs Cap 48x48 pads Cls 2/3

Equipment Description:

This product was posted on 11/25/2024

Model: Rightline LC20C-10-3A
Type: Industrial Laser Cutter
Laser Power: 150W CO2 Laser
Cutting Area: 1000mm x 600mm
Max Cutting Speed: 600 mm/s
Resolution: 1000 dpi
Position Accuracy: ± 0.01 mm
Supported Materials:
- Acrylic
- Wood
- Leather
- Fabric
- Rubber
Control Software: Compatible with major design software through plugins
Connectivity:
- USB
- Ethernet
Power Supply: AC 220V ±10%, 50/60Hz
Cooling System: Water Cooling System
Dimensions: 1400mm x 950mm x 1050mm
Net Weight: 180 kg
Operating Temperature: 10°C - 35°C
Noise Level: Below 65 dB

Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.