488 miles away
Overview
Spec Sheet
Shipping/Freight

2016 Hitachi ZX250 LC-6 Earth Moving and Construction

$97,400 USD
Contact Information
4M Iron
344 Winningham Road,
St. George, South Carolina 29477
CONTACT :
Mike Finley
PHONE :
Stock #:
17023
YEAR:
2016
Manufacturer:
MODEL #:
SERIAL #:
HCMDC150V000500XX
CONDITION:
Used
HOUR METER:
6197
Equipment Description:
CAB WITH AC, ISUZU DIESEL, AUX HYDRAULICS WITH HYDRAULIC THUMB, BUCKET AND QUICK COUPLER, UNDERCARRIAGE AT 85+%, CLEAN AND RUNS GOOD
  • Engine Specifications
    • Model: Isuzu CC-6BG1T
    • Type: Water-cooled, direct injection
    • Power: Approximately 177 horsepower (132 kW) @ 2,200 rpm
    • Displacement: 6.5 liters
    • Fuel Tank Capacity: 145 gallons (550 liters)
  • Operational Specifications
    • Operating Weight: Approximately 54,000 lbs (24,500 kg)
    • Max Digging Depth: Up to 23.0 ft (7 meters)
    • Max Reach at Ground Level: About 34.5 ft (10.5 meters)
    • Max Dumping Height: Approximately 23.3 ft (7.1 meters)
    • Tailing Radius: 10.1 ft (3.07 meters)
  • Dimensions
    • Overall Length: 33.96 ft (10.35 meters)
    • Overall Width: 10.5 ft (3.2 meters)
    • Overall Height: 10.7 ft (3.25 meters)
    • Track Length: Approximately 16.4 ft (5.0 meters)
    • Track Gauge: 9.0 ft (2.74 meters)
  • Hydraulic System
    • Pump Type: Variable displacement axial piston pumps
    • Main Pumps: 2 variable displacement axial piston pumps
    • Max Flow: 59.8 gallons per minute (226 liters per minute) per pump
    • System Pressure: Approximately 4,975 psi (34.3 MPa)
  • Undercarriage
    • Track Shoe Width: 31.5 inches (800 mm)
    • Number of Carrier Rollers: 2 per side
    • Number of Track Rollers: 9 per side
    • Swing Speed: 12.4 rpm
  • Cab and Controls
    • Cab Type: Sound-suppressed, pressurized
    • Climate Control: Air conditioning and heater
    • Seat: Adjustable suspension
    • Controls: Pilot-operated hand controls
  • Attachments and Options
    • Buckets: Various sizes available
    • Thumb Attachments: Optional
    • Hydraulic Quick Coupler: Optional
    • Auxiliary Hydraulic Lines: Optional
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following