National Equipment, LLC Madera, California
2002 miles away
Overview
Spec Sheet
Shipping/Freight

1997 Cat D5M XL Earth Moving and Construction

$44,500 USD
Contact Information
National Equipment, LLC
12201 Hwy 99 (at Ave 12)
Madera, California 93638
CONTACT :
Jim Gagliardi
PHONE :
Stock #:
0480
YEAR:
1997
Manufacturer:
MODEL #:
CONDITION:
Used
LOCATION:
Equipment Description:
Canopy, Fingertip Steering, 6 way Blade, Slope Board, Ripper, CAT 3116, Hour meter reads - 11,524
  • Engine
    • Model: Cat 3126
    • Power: 133 hp (99 kW)
    • Displacement: 439 in³ (7.2 L)
    • Rated Engine Speed: 2000 rpm
    • Torque at Rated Speed: 461 lb-ft (625 Nm)
  • Operating Specifications
    • Operating Weight: 29,459 lb (13,367 kg)
    • Fuel Capacity: 76 gal (288 L)
    • Cooling System Fluid Capacity: 10 gal (38 L)
    • Engine Oil Capacity: 5.5 gal (21 L)
    • Transmission Fluid Capacity: 16 gal (60 L)
  • Transmission
    • Type: Power Shift
    • Number of Forward Gears: 3
    • Number of Reverse Gears: 3
  • Undercarriage
    • Shoe Type: Triple Grouser
    • Shoes/Side: 40
    • Track Gauge: 74.4 in (1,890 mm)
    • Track Length: 103.1 in (2,619 mm)
    • Ground Contact Area: 4,495 in² (2.9 m²)
  • Blade
    • Type: Straight Blade
    • Capacity: 4.59 yd³ (3.51 m³)
    • Width: 10 ft (3,048 mm)
  • Hydraulic System
    • Main Relief Valve Pressure: 2,500 psi (17,237 kPa)
    • Pump Flow Capacity: 25 gal/min (95 L/min)
  • Dimensions
    • Length: 193 in (4,902 mm)
    • Width: 120 in (3,048 mm)
    • Height: 121 in (3,073 mm)
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following