New Tec, Inc. Sioux Center, Iowa
714 miles away
Overview
Spec Sheet
Shipping/Freight

2024 Kubota L2502HST Earth Moving and Construction

Call for priceNew
Contact Information
New Tec, Inc.
3764 US 75 Ave
Sioux Center, Iowa 51250
CONTACT :
Joe or Marlin
PHONE :
FAX :
Stock #:
0019494
YEAR:
2024
Manufacturer:
MODEL #:
SERIAL #:
KBULMDHREPJM17620
CONDITION:
New
LOCATION:
DESCRIPTION:
Tractor, 24.8Hp, Kubota Diesel, 4WD, Foldable ROPS
Equipment Description:
Hydrostatic Transmission, R4 Industrial Tires, Cruise Control Kit, Loader & 66" Quick Attach Bucket, 1 Hour
  • Engine Specifications
    • Model: Kubota D1703-M
    • Type: Vertical, Water-Cooled, 4-Cycle Diesel
    • Number of Cylinders: 3
    • Engine Displacement: 1.647 L (100.5 cu in.)
    • Gross Horsepower: 24.8 HP (18.5 kW) at 2,700 RPM
    • Fuel Tank Capacity: 10.6 gallons (40 liters)
  • Transmission
    • Type: Hydrostatic Transmission (HST) with High-Low Gear Shift
    • Number of Forward/Reverse Speeds: Infinite
    • Brakes: Wet Disc
    • Clutch: Dry Single Plate
    • Final Drive: Spur Gear
  • Dimensions and Weight
    • Overall Length: 110.6 inches (2,810 mm)
    • Overall Width: 55.1 inches (1,400 mm)
    • Overall Height: 91.7 inches (2,330 mm) with ROPS
    • Wheelbase: 65.6 inches (1,665 mm)
    • Curb Weight: 2,491 lbs (1,130 kg)
  • Tires
    • Standard Tires: Ag Tires
    • Front: 7-16
    • Rear: 12.4-24
  • PTO
    • Type: Live Independent, Hydraulic Clutch
    • Rear PTO Speed: 540 RPM
  • Hydraulics
    • Type: Open Center
    • Implement Pump Output: 5 GPM (18.9 L/min)
    • Hydraulic Outlet: 1 (Standard)
    • Total Pump Output: 9 GPM (34.1 L/min)
  • 3-Point Hitch
    • Category: I
    • Lifting Capacity at Lift Points: 1,918 lbs (870 kg)
    • Control Type: Position Control and Top Link Draft Sensing
  • Electrical
    • Battery: 12 Volts
    • Charging System: Alternator
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following