488 miles away
Overview
Spec Sheet
Shipping/Freight

2020 Cat 313FL Earth Moving and Construction

$113,500 USD
Contact Information
4M Iron
344 Winningham Road,
St. George, South Carolina 29477
CONTACT :
Mike Finley
PHONE :
Stock #:
14925
YEAR:
2020
Manufacturer:
MODEL #:
CONDITION:
Used
HOUR METER:
3334
Equipment Description:
CAB WITH AC, AUX HYDRAULICS, QUICK COUPLER WITH 42" BUCKET, BACKUP AND SIDE CAMERA, LOW HOURS, EXCELLENT CONDITION
  • General Specifications
    • Net Power: 70 kW (94 HP)
    • Operating Weight: 30,200 lb (13,700 kg)
    • Engine Model: Cat C4.4 ACERT
    • Bore: 4.13 inches (105 mm)
    • Stroke: 5.0 inches (127 mm)
    • Displacement: 268 cubic inches (4.4 L)
  • Engine Specifications
    • Gross Power: 74.5 kW (101 HP)
    • Net Power ISO 9249: 70.4 kW (94 HP)
    • Emissions: Meets Tier 4 Final/Stage IV emission standards
  • Dimensions
    • Shipping Length: 25.1 ft (7.64 m)
    • Shipping Height: 8.8 ft (2.67 m)
    • Shipping Width: 8.5 ft (2.59 m)
    • Tail Swing Radius: 7.1 ft (2.15 m)
  • Hydraulic System
    • Maximum Flow: 214 L/min
    • Main System - Maximum Pressure: 34,300 kPa
    • Pilot System - Maximum Pressure: 4120 kPa
    • Hydraulic System Tank Capacity: 38 L
  • Performance
    • Maximum Digging Depth: 19.9 ft (6.07 m)
    • Maximum Reach at Ground Level: 28.7 ft (8.75 m)
    • Maximum Cutting Height: 29.3 ft (8.94 m)
    • Maximum Loading Height: 20.2 ft (6.15 m)
  • Operational Capabilities
    • Bucket Digging Force: 104 kN (23,308 lbf)
    • Stick Digging Force: 65 kN (14,612 lbf)
    • Lift Capacity at Ground Level: 7164 lb (3,250 kg)
  • Fuel and Fluid Capacities
    • Fuel Tank Capacity: 227 L
    • Engine Oil: 11.2 L
    • Cooling System: 20 L
    • Final Drive: 3 L
  • Standard Equipment
    • Cab with ROPS
    • Automatic climate control
    • AM/FM radio
    • Engine idle shutdown
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following