New Tec, Inc. Sioux Center, Iowa
714 miles away
Overview
Spec Sheet
Shipping/Freight

2019 LP Gas Doosan G33N-7 Pneumatic Tire 4 Wheel Sit Down

$24,950 USD
Contact Information
New Tec, Inc.
3764 US 75 Ave
Sioux Center, Iowa 51250
CONTACT :
Joe or Marlin
PHONE :
FAX :
Stock #:
0020120
YEAR:
2019
Manufacturer:
MODEL #:
CAPACITY:
6500
FUEL:
LP Gas
MAST TYPE:
Quad Mast
MAST HEIGHT:
84 / 240 in
SERIAL #:
FGA16-1290-00056
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
2475
DESCRIPTION:
4st 84/240 Mast, Side Shift & Fork Positioner, LP, 60" Forks
Equipment Description:
Solid Tires, 2475 Hours
  • Engine
    • Type: LPG/Gasoline Engine
    • Model: PSI 2.4L
    • Power Output: Approx. 58.8 kW (78.8 HP) @ 2400 rpm
    • Torque: Approx. 208 Nm @ 1600 rpm
    • Number of Cylinders: 4
  • Performance
    • Load Capacity: 3,300 kg (Approximately 7,275 lbs)
    • Max Travel Speed (Full Load): 19.7 km/h (12.2 mph)
    • Max Travel Speed (No Load): 20.0 km/h (12.4 mph)
    • Gradeability: 38% (at full load)
  • Dimensions
    • Overall Length (with Forks): 3,725 mm
    • Overall Width: 1,295 mm
    • Overall Height (Overhead Guard): 2,160 mm
    • Wheelbase: 1,855 mm
    • Ground Clearance: 140 mm
  • Weights
    • Service Weight: 4,830 kg
    • Axle Load (Front/Full Load): 6,980 kg
    • Axle Load (Rear/Full Load): 1,150 kg
  • Tires
    • Front: 7.00 - 12 - 12PR
    • Rear: 6.00 - 9 - 10PR
    • Tire Type: Pneumatic
  • Hydraulics
    • Hydraulic Pressure: 181 bar
    • Hydraulic Tank Capacity: 64 liters
  • Brakes
    • Service Brake: Hydraulic
    • Parking Brake: Mechanical Lever
  • Mast
    • Mast Type: Standard 2-Stage
    • Lift Height: 3,300 mm
    • Free Lift: 150 mm
    • Tilting Angle (Forward/Backward): 6°/12°
  • General
    • Operator Compartment: Ergonomic Design
    • Steering: Hydraulic Power Steering
    • Transmission: Automatic Power Shift
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following