New Tec, Inc. Sioux Center, Iowa
714 miles away
Overview
Spec Sheet
Shipping/Freight

2023 Kubota L4802HST Agricultural & Farming

Call for priceNew
Contact Information
New Tec, Inc.
3764 US 75 Ave
Sioux Center, Iowa 51250
CONTACT :
Joe or Marlin
PHONE :
FAX :
Stock #:
0019118
YEAR:
2023
Manufacturer:
MODEL #:
SUBCATEGORY:
SERIAL #:
KBULMCHRHPJG11530
CONDITION:
New
LOCATION:
DESCRIPTION:
Tractor, 4WD, Kubota Engine, Gross 48.4 Hp / PTO 39 Hp
Equipment Description:
Foldable ROPS, HST Transmission, R4 Tires
  • Engine:
    • Type: Direct Injection, Vertical, Water-cooled 4-cycle diesel
    • Engine Model: V2403-CR-TIE4
    • Gross HP: 48.4 (36.1 kW)
    • Net HP: 47.3 (35.3 kW)
    • Total Displacement: 148.5 cu.in. (2,434 cc)
    • Rated RPM: 2,600
    • Fuel Tank Capacity: 13.5 gal. (51 L)
  • Transmission:
    • Type: Hydrostatic transmission, 3-range
    • Max Forward Speed: 12.6 mph (20.3 km/h)
    • Max Reverse Speed: 12.0 mph (19.3 km/h)
  • Hydraulics:
    • Pump Capacity (PS): 8.5 gpm (32.2 L/min)
    • Pump Capacity (3-Point Hitch): 5.0 gpm (19 L/min)
    • 3-Point Hitch: Category I
    • Hydraulic Control System: Position control, standard; draft control, optional
    • Lift Capacity at 24 inches behind lift point: 2,760 lbs (1,251 kg)
  • Dimensions:
    • Overall Length (w/o 3P): 123.2 in. (3,130 mm)
    • Overall Width (min. tread): 67.3 in. (1,710 mm)
    • Overall Height (top of ROPS): 97.2 in. (2,470 mm)
    • Wheelbase: 72.8 in. (1,850 mm)
    • Ground Clearance: 13.5 in. (340 mm)
  • Tire Sizes:
    • Standard Front: 9.5-16 R1
    • Standard Rear: 14.9-24 R1
  • Weight:
    • Weight with ROPS: 3,505 lbs (1,590 kg)
  • PTO:
    • Type: Live-independent, hydraulic
    • Rear PTO: 540 RPM
    • Mid PTO: Optional
  • Steering:
    • Type: Hydrostatic power steering
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following