Doosan Material Handling Solutions of Southern Cal Orange , California
1963 miles away
Overview
Spec Sheet
Shipping/Freight

2021 LP Gas Doosan G30N-7 Pneumatic Tire 4 Wheel Sit Down

Call for priceBuy or Rent
Contact Information
CONTACT :
Cody Anderson
PHONE :
Stock #:
9245-21
YEAR:
2021
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
LP Gas
MAST TYPE:
Three Stage
MAST HEIGHT:
84 / 186 in
SIDE SHIFTER:
Yes
CONDITION:
Used/Rental
HOUR METER:
562
LOCATION:
DESCRIPTION:
Rental Unit Available in California
Equipment Description:
  • General Specifications
    • Model Type: Doosan G30N-7
    • Engine Type: LP Gas
    • Operator Type: Seated Rider
  • Dimensions
    • Overall Length: 3,620 mm (142.5 in)
    • Overall Width: 1,220 mm (48 in)
    • Overall Height: 2,150 mm (84.6 in)
    • Wheelbase: 1,850 mm (72.8 in)
    • Ground Clearance: 140 mm (5.5 in)
  • Performance
    • Lifting Capacity: 3,000 kg (6,614 lbs)
    • Lifting Height: 3,300 mm (129.9 in)
    • Travel Speed: 18 km/h (11.2 mph)
  • Engine Specifications
    • Engine Model: K25
    • Power Output: 50 kW (67 hp) @ 2,700 rpm
    • Displacement: 2.5 L
  • Hydraulic System
    • Hydraulic Pressure: 183 bar (2,655 psi)
    • Hydraulic Flow Rate: 60 L/min (15.9 gal/min)
  • Tires
    • Tire Type: Pneumatic
    • Front Tire Size: 7.00-12
    • Rear Tire Size: 6.00-9
  • Weight
    • Service Weight: 4,640 kg (10,231 lbs)
  • Fuel Capacity
    • Fuel Tank Capacity: 47 L (12.4 gal)
  • Brakes
    • Service Brakes: Hydraulic
    • Parking Brakes: Mechanical Lever Type
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
Please correct the following