ProLift Toyota Material Handling Louisville, Kentucky
184 miles away
Overview
Spec Sheet
Shipping/Freight

2011 Electric Toyota 7BNCU20 Electric Stand Up End Control (Docker)

$10,000 USD
Contact Information
CONTACT :
Jessica Conrad
PHONE :
Stock #:
7BNCU2051006
YEAR:
2011
Manufacturer:
MODEL #:
CAPACITY:
4000
FUEL:
Electric
MAST TYPE:
Two Stage
MAST HEIGHT:
203 in
SERIAL #:
51006
SIDE SHIFTER:
Yes
CONDITION:
Used
HOUR METER:
3929
LOCATION:
DESCRIPTION:
2011 7BNCU20 - 2 stage, low hours!
Equipment Description:
7BNCU20 4000 lb capacity 3929 hours 2 stage/ 203 lift height
  • Power:
    • Battery Type: Electric
    • Voltage: 48V
  • Capacity:
    • Load Capacity: 4,000 lbs (1,814 kg)
    • Load Center: 24 inches (610 mm)
  • Performance:
    • Travel Speed (full load): 8.3 mph (13.4 km/h)
    • Lift Speed (full load): 63.0 ft/min (19.2 m/min)
    • Lowering Speed (full load): 98.0 ft/min (29.8 m/min)
  • Dimensions:
    • Overall Length: 127 inches (3,226 mm)
    • Overall Width: 42 inches (1,067 mm)
    • Overall Height: 87 inches (2,210 mm)
    • Wheelbase: 59 inches (1,500 mm)
  • Turning Radius:
    • Turning Radius: 69 inches (1,754 mm)
  • Weight:
    • Truck Weight: 8,800 lbs (3,992 kg)
  • Tires:
    • Front: Solid Pneumatic
    • Rear: Solid Pneumatic
  • Mast:
    • Mast Type: 3-Stage Full Free Lift Mast
    • Maximum Fork Height: 187 inches (4,750 mm)
  • Hydraulics:
    • Hydraulic Pressure: 3,200 psi (220 bar)
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following