Equipment Description:

8000LB CAPACITY 3 STAGE MAST 88" LOWERED 186" RAISED DIESEL FUEL NEW PNEUMATIC TIRES SIDE SHIFT 60" FORKS ** This lift has been completely refurbished. New Perkins engine, new brakes, hoses, rebuilt steer axle, solid pneumatic tires, rebuilt handles ( no slop). All Cyl repacked new mast bearings and mast chains. This unit runs and operates like new. Before the engine was replaced, the lift had 8000 hours. The dash was replaced with a new one and now reads 200 with hours from the previous engine. The new engine has less than 2 hours.

2005 Diesel Hyster H80XM Pneumatic Tire 4 Wheel Sit Down

Call for priceFor Rent

Contact Information

Supreme Forklift & Equipment
3695 E Apache Trail Suite 1
Apache Junction, Arizona 85119

CONTACT :

Sales Dept.

PHONE :

480-660-4508

Stock #:

YEAR:

2005

Manufacturer:

Hyster

MODEL #:

H80XM

CAPACITY:

8000

FUEL:

Diesel

SUBCATEGORY:

Pneumatic Tire 4 Wheel Sit Down

MAST TYPE:

Three Stage

MAST HEIGHT:

88 / 186 in

SIDE SHIFTER:

Yes

CONDITION:

Rental

HOUR METER:

200

LOCATION:

N/A

Equipment Description:

This product was posted on 7/8/2024

General Specifications
- Model: Hyster H80XM
- Type: Diesel/LPG Forklift
- Capacity: 8,000 lbs
- Fuel type: Diesel or LPG
- Tires: Pneumatic or Solid
Engine Specifications
- Engine Manufacturer: Various (e.g., GM 4.3L V6 for LPG, Diesel options available)
- Power: Between 80 - 90 HP depending on the engine model
- Cylinders: 6-cylinder (for most LPG models)
- Engine Capacity: Approximately 4.3 liters (for LPG models)
Dimensions
- Overall Length (without forks): Approximately 150 inches
- Overall Width: Approximately 55 inches
- Overall Height (cab height): Approximately 91 inches
- Wheelbase: Approximately 84 inches
Mast and Lift
- Standard Lift Height: Approximately 130 inches
- Free Lift: Varies by mast type
- Mast Tilt: Forward tilt approximately 6 degrees, Backward tilt approximately 10 degrees
- Lowered Mast Height: Approximately 89 inches
Performance
- Travel Speed (unloaded): Approximately 12 mph
- Travel Speed (loaded): Approximately 11 mph
- Lifting Speed (unloaded): Approximately 120 feet per minute
- Lifting Speed (loaded): Approximately 115 feet per minute
Operational Capacities
- Fuel Tank Capacity: Varies based on engine type and customer specifications
- Hydraulic System Pressure: Approximately 2250 psi
- Steering System: Hydraulic power steering
Brakes and Controls
- Braking System: Hydraulic with drum brakes
- Control Type: Seated control with levers for mast and lifting operations

Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.