Bigfoot Forklift Spindale , North Carolina
325 miles away
Overview
Spec Sheet
Shipping/Freight

Enersys WH3-25-1500

Call for price
Contact Information
Bigfoot Forklift
1545 Old Ballpark Rd
Spindale , North Carolina 28160
CONTACT :
David Herrera
PHONE :
Stock #:
2814
Manufacturer:
MODEL #:
Phase:
Three Phase
AH Capacity:
240
Voltage:
48
SERIAL #:
FE12484
CONDITION:
Used
Equipment Description:
  • Application: Material handling equipment, electric forklifts, work platforms
  • Battery Type: Lithium-ion
  • Nominal Voltage: 25.6 V
  • Nominal Capacity: 1500 Ah
  • Energy Capacity: 38.4 kWh
  • Cycle Life: 3,000 cycles at 80% depth of discharge
  • Charge Time: Approximately 1-2 hours depending on charger power and conditions
  • Temperature Range:
    • Operating: -10°C to +55°C (14°F to 131°F)
    • Storage: -20°C to +60°C (-4°F to 140°F)
  • Battery Management System (BMS): Integrated BMS with cell monitoring and balancing
  • Communication Interface: CANBus, RS485
  • Dimensions:
    • Length: 1000 mm (39.4 in)
    • Width: 850 mm (33.5 in)
    • Height: 610 mm (24.0 in)
  • Weight: Approximately 580 kg (1279 lbs)
  • Safety Features: Overcharge protection, overdischarge protection, short-circuit protection, over-temperature protection
  • Compliance and Certifications: UL 2580, UN 38.3, CE, RoHS
  • Warranty: Typically around 5 years or 3,000 cycles, whichever comes first
  • Enclosure Protection: IP65 or equivalent for dust and water resistance
  • Maintenance: Low maintenance with no watering or cleaning of terminals required
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following