Heavy Lift Sales, Rentals & Leasing Buffalo, New York
301 miles away
Overview
Spec Sheet
Shipping/Freight

2008 Diesel TCM FD30T3 Pneumatic Tire 4 Wheel Sit Down

Call for price
Contact Information
CONTACT :
Sales Department
PHONE :
FAX :
Stock #:
60TC1481
YEAR:
2008
Manufacturer:
MODEL #:
CAPACITY:
6000
FUEL:
Diesel
MAST TYPE:
Three Stage
MAST HEIGHT:
87 / 189 in
CONDITION:
Used
HOUR METER:
6100
LOCATION:
N/A [14221]
DESCRIPTION:
6100 Hours, Pneumatic tires
Equipment Description:
  • General Information
    • Model: TCM FD30T3
    • Type: Diesel Forklift
    • Manufacturer: TCM
  • Capacity and Dimensions
    • Load Capacity: 3,000 kg (6,613 lbs)
    • Load Center: 500 mm (19.7 in)
    • Overall Length: 3,720 mm (146.5 in)
    • Overall Width: 1,225 mm (48.2 in)
    • Wheelbase: 1,700 mm (66.9 in)
    • Turning Radius: 2,470 mm (97.2 in)
  • Performance
    • Travel Speed (Loaded/Unloaded): 18/19 km/h (11.2/11.8 mph)
    • Lift Speed (Loaded): 500 mm/s (19.7 in/s)
    • Max Fork Height: Typically ranges around 3,005 mm (118.3 in), varies by specific model version
  • Engine
    • Engine Model: Nissan TD27
    • Engine Type: Diesel
    • Displacement: 2,663 cc (2.66 L)
    • Power Output: Approximately 48 kW (64 HP) at 2,500 rpm
    • Fuel Tank Capacity: 70 liters (18.5 gallons)
  • Chassis and Structure
    • Axle: Full-floating drive axle
    • Tires: Pneumatic tires, with configurations typically including front: 7.00-12 and rear: 6.00-9
    • Brake System: Wet disc brake system
  • Hydraulic System
    • Hydraulic Pump: Gear type
    • Pressure Setting: Typically around 170 kg/cm2 (2,416 psi)
  • Other Features
    • Steering: Hydraulic power steering
    • Transmission: Powershift, automatic
Legal Disclaimer

The specifications provided herein are for informational purposes only and are not guaranteed to be 100% accurate. This tool is currently in beta testing, and while we strive to provide the most accurate and up-to-date information, there may be discrepancies or errors. We strongly recommend that you verify all specifications and details with the manufacturer of the equipment or an authorized dealer. The information presented should not be considered definitive or relied upon as the sole basis for decision-making. In some cases, certain specifications are based on new equipment when shipped from the factory and may have changed over time. For example, masts and forks are routinely changed or updated. Headlights, taillights, and backup alarms are usually included with new equipment, but can be removed over time. Neither the creators of this tool nor any affiliated parties shall be held liable for any inaccuracies, errors, or omissions in the information provided. By using this tool, you acknowledge and agree that you assume all risks associated with the use of the specifications and information provided. For 100% accuracy and the most reliable information, please contact the manufacturer of the equipment or an authorized dealer directly.


Your location is Columbus, OH. Modify

Call
Get Quote
Equipment Finder Equipment
finder
*Payment stated above assumes a secured commercial loan transaction available to highly qualified applicants. Commercial financing provided or arranged by Strada Capital Corporation dba Mazo Capital Solutions pursuant to California Finance Lender License #603G255. Equal opportunity lender. Not all applicants will qualify. Applicant credit profile including FICO is used for credit review. Actual terms available may vary depending on applicant and/or guarantor credit profile(s), equipment type and additional approval conditions. Older assets or more may require increased finance charges. Financing approval will require pledge of collateral as security.
Please correct the following